DESCRIPTION
Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
18” flexible conduit
13.38”
14.20”
19.70”
9.48”
9.95”
11.31”
13.01”
1.70”
9.45”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
6.69”
Thermal
Protector
Perforated
Meshplate
Separate Wiring
Compartment
9.25”
4.10”
Integral Electronic
Metal Halide Ballasts
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
and two knockouts for conduit entry and
features a perforated metal door for easy
maintenance access and cooler operation.
Entire electrical assembly (jbox and ballast
enclosure) is removable from the housing
for easy maintenance.
E ... Lamps
One (1) PAR38 Metal Halide lamp
mounted in adjustable double gimbal.
Lamp holder is removable and may be
regressed 1” for additional cut-off. Lamp
can accept optical accessories. 45º x 45º
locking lamp adjustment. Beveled-edge
lamp ring is secured with threadless, bay-
onet action. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes Med. Base socket.
F ... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing through the
meshplate with screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 7.80” x 7.80”
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
One (1) Light
PAR38 Metal Halide
Remodel Housing
Trimless
ORDERING INFORMATION
An adjustable Single-lamp Recessed fixture for trimless installation suitable
for downlighting and accent applications. Utilizes ONE (1) PAR38 Metal Halide
lamp.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 050108
For use with 70W or 100W PAR38 Metal halide lamps.
Configuration
C1
=
COMBOLIGHT
Recessed One (1) Light
Housing
R
=
Remodel
C1 R E N N
Lamp Type / Wattage Label
070M38
=
70 Watt PAR38 Metal Halide
100M38
=
100 Watt PAR38 Metal Halide
Power Supply
E
=
Electronic Metal Halide
Ballast
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Insert Finish
N
=
Trimless
Trim Insert
N
=
Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals